Blade RR with its special rubber base 30 mm, allows snow to slush or treated with salt. It helps to clear snow from city streets and mountain road up. The rubber base ensures a good scraping while avoiding collision with obstacles such as manhole covers, manholes or threshold gates. It is possible to mount a base polyurethane instead of rubber (optional).

The blade body is made of polyethylene and ensures perfect gliding snow. The curve of the blade is specifically designed for snow and wind to avoid maximum projections of snow against the windshield of the vehicle.

The blade is connected to the parallelogram by two ball joints allowing orientation, consisting of two telescopic cylinders SE, in order to reduce stress on the blade body and a large lift under the action of a double acting cylinder. The blade also has a vibration system to track changes in slope of the road.

The blades are equipped with signaling LEDS, in accordance with standard NFP-98-795.

SPR blade with steel or rubber base allows the clearing of snow, slush or treated with salt.

The base steel or rubber has an effective system against obstacles with two independent retractable flaps coupled with double-acting shock absorbers gas. This system prevents the blade to jump after hitting an obstacle.The blade body is made of polyethylene and ensures perfect gliding snow. The curve of the blade is specially designed to prevent snow and wind maximum projections of snow against the windshield of the vehicle.

The blade is connected to the parallelogram by two ball joints allowing orientation, consisting of two telescopic cylinders SE, in order to reduce stress on the blade body and a large lift under the action of a double acting cylinder. The blade also has a vibration system to track changes in slope of the road.

The blades are equipped with signaling LEDS, in accordance with standard NFP-98-795.
SPR allows the blade to clear snow effectively urban roads, roads plain, like the mountain roads.

Blade retractable panels, allows clearing of all types of snow with a Robust security on mountain roads.

Each panel has 4 elements vulkolan deformable having very good shape memory back to their original positions after passing an obstacle. The panels can overcome obstacles without damaging the structure of the blade and they fit the profile of the road. These blades are very quiet labor, no vibration is transmitted to the vehicle chassis.

Hooves to wear steel or polyurethane (optional) 360 degrees, relieves wear steel blade 400 brinells. It is possible to mount a base rubber instead of steel. End of hooves can lean against sidewalks and curbs without damaging the body blades.
The blade body is reinforced polyethylene and ensures perfect gliding snow thereon. The curvature of the blade is specially designed to prevent the snow and wind up projections of snow against the windshield of the vehicle.

The blade body is connected to the parallelogram by two spherical bearings for orientation and a large lift under the action of a double acting cylinder. The blade also has a vibration system to track changes in slope of the road.
The blades are equipped with signaling LEDS, in accordance with standard

PV blade to 4 retractable panels, allows snow all types of snow with a foolproof security on rough roads mountain.

Each panel has 4 elements vulkolan deformable having very good shape memory back to their original positions after passing an obstacle. The panels can overcome obstacles without damaging the structure of the blade and they fit the profile of the road. These blades are very quiet labor, no vibration is transmitted to the vehicle chassis.

Hooves to wear steel or polyurethane (optional) 360 degrees, relieves wear steel blade 400 brinells. It is possible to mount a base rubber instead of steel. End of hooves can lean against sidewalks and curbs without damaging the body blades.

The blade body is reinforced polyethylene and ensures perfect gliding snow thereon. The curvature of the blade is specially designed to prevent the snow and wind up projections of snow against the windshield of the vehicle.
Two blade heights are proposed for the PVR array. 1.05 m and 1.30m.

The blade body is connected to the parallelogram by two spherical bearings for orientation and a large lift under the action of a double acting cylinder. The blade also has a vibration system to track changes in slope of the road.
The blades are equipped with signaling LEDS, in accordance with standard

Bi-scraping blade steel and rubber, allows snow to all snow types. You can change the base wear from the cockpit.

The steel base has a
Oleopneumatic powerful barriers against two independent retractable flaps.

The blade body is made of polyethylene and ensures perfect gliding snow. The curve of the blade is specially designed to prevent the maximum projections of snow against the windshield of the vehicle.

The blade body is connected to the parallelogram by two spherical bearings for orientation and a large lift under the action of a double acting cylinder. The blade also has a vibration system to track changes in slope of the road.

The blades are equipped with signaling LEDS, in accordance with standard.

Bi-blade scraper with its versatility allows efficient plowing urban roads, roads plain, like mountain roads.

Bi-scraping blade steel and rubber, allows snow to all snow types. You can change the base wear from the cockpit.

The steel base has a
Oleopneumatic performance against obstacles with four independent folding flaps.

The blade body is made of polyethylene and ensures perfect gliding snow thereon. The curve of the blade is specially designed to prevent the maximum projections of snow against the windshield of the vehicle.

The blade body is connected to the parallelogram by two spherical bearings for orientation and a large lift under the action of a double acting cylinder. The blade also has a vibration system to track changes in slope of the road.
The blades are equipped with signaling LEDS, in accordance with standard.

Bi-blade scraper with its versatility allows efficient plowing urban roads, motorways, airports, roads plain as roads medium and high mountains.

NORTH CAPE blade with two side flaps with independent hydraulic controls allows you to work in urban congested! Also appreciated for its maneuverability in ski resorts, parking, taxiway and airport motorway service areas.

Blade bi-scraping steel / rubber or polyurethane, allows snow to all snow types. You can change the base wear from the cockpit.

The steel base has a
Oleopneumatic performance against obstacles with four independent folding flaps.

The blade body is made of polyethylene and ensures perfect gliding snow. The curve of the blade is specially studied to avoid maximum projections of snow against the windshield of the vehicle.
The blade body is connected to the parallelogram by two spherical bearings for orientation and a large lift under the action of a double acting cylinder. All hydraulic functions are protected by a security system for shock valves. The blade also has a vibration system to track changes in slope of the road.
The blades are equipped with signaling LEDS, in accordance with standard

The V-BLADE fixed with steel base 400 Special brinells and penetration angle of 80 °, allows snow to heavy snowfall, enter into snow drifts or snow plow will be ineffective.

The body of the bow is made of steel and ensures a perfect sliding of the snow. The curve is specially designed to prevent snow and wind maximum projections of snow against the windshield of the vehicle.

The V-BLADE fixed is connected to a deformable parallelogram with a large lift under the action of a double acting cylinder. The bow may receive an oscillation system to track changes in slope of the road (option).

The V-Blades are equipped with a fixed signaling LEDS, in accordance with standard.

The V-Blade can effectively plow local roads, mountain roads as roads plains prone to the formation of snowdrift.

Their frames couplers are designed to adapt to standards SETRA, DIN T3, T5 or hitches Agricole.

The V-BLADE convertible is particularly suitable for heavy snowfall. It allows you to do the job opening and widening turning into snow plow. It is also appreciated for clearing intersections and parking.
Curve is arranged to wind the snow. The compass opening allow a multiplication of effort and a fast opening fins. The flaps are hinged to a vertical center line to avoid the snow to pass between the flaps and the tip is a few positions.
The base steel 400 brinells and its angle of attack can take off the snow and ice easily. A polyurethane base can also be mounted to the work of snowmelt. For the latter, we recommend our hydraulic relief system (optional), to prevent premature wear of your base.
The parallelogram long travel lift height ensures important. Setting allows you to correct the attitude of the stem to ensure even wear of your base wear.
The coupling frame swash allows the bow to correct the slope floor. Is predisposed to fit all types of fasteners (SETRA, DIN T3, T5 DIN, 3-point agricultural adaptation charger).
Anti deflector projection was developed to avoid splashing snow at high speed on the windshield of the vehicle (optional).
Signaling LEDS series.

The Flap expander can plow extra width, in addition to front-mounted snow. A perfect recovery of the bead of snow left by the blade or bow is obtained.
The deck HDPE promotes better gliding on the snow cover.
The structure of the fin is boxed with continuous welding elements to prevent water seeping into the hollow body.
Axes and galvanized bolts with grease on the joints.
3-piece steel base with safety anti-shock.
Orientation, oscillation and hydraulic lift provided by generously dimensioned double-acting cylinders.
Security hydraulic cylinders with pressure relief to prevent the risk of buckling.
Our fins are fixed on one side of the coupling plate. Mounting with the right or left. They are placed on trucks from 15 to 42 T with a wheelbase of 3500 mm minimum. On some trucks, it is necessary to move the bodies to perform this kind of installation.

Fins clippers single column settle quickly (fork removal option).
They are mounted on vehicles UNIMOG, THOMAS and other special vehicles.
They can increase the clearing width and clip the slope of snow. They ensure perfect recovery of the snow from the front of snow equipment, even when cornering. Placed on the ground, they perfectly fit the irregularities of the floor with their oscillation system.
They can be quickly folded against the vehicle or some of the position they are. It is possible, on request, to have the wings fold in the size of the vehicle in order to better operate on narrow roads during transfers.
The steel structure is fully boxed high elasticity. Curve is coated high density polyethylene to facilitate sliding of the snow.
All joints are fitted with grease nipples. Fully hydraulic operation.
Discharge valves of the cylinders provide security.
Joysticks placed on supports ergonomic cabin, control fins.

The two-column assembly for vehicles THOMAS high power and loader.
It increases the clearing width and clip the slope snow for better visibility of road users. Fins ensure perfect recovery of the snow from snow removal equipment front, even when cornering. Placed on the ground, they fit the irregularities of the road with their oscillation system. They can when passing a vehicle, the vehicle back quickly against some of the position where they are.
The steel structure with high elasticity is fully boxed. Curve is coated high density polyethylene to facilitate sliding of the snow.
All joints are fitted with grease nipples. The operation is fully hydraulic.
Discharge valves on the cylinders to ensure the safety of all.
Joysticks placed ergonomic cab supports provide all maneuvers.

They feature a shell ejection mobile hydraulically, so that it can be oriented to eject to the right or left. These machines are especially suitable to keep the width of the lanes shoveling snow beads that accumulates on the edges of roads and highways.
It is possible to adapt the end of the exhaust pipe, a fireplace rotatable 210 ° hydraulically facilitating the work in congested areas (option). This double turbine is ideal for removing snow from local roads, highways, airports, ski resorts and mountain roads.

The combination triple output (optional), you can enjoy all the qualities of this machine maintaining a direct jet ejection snow right and left with a throw distance appreciable or go through a central fireplace hydraulically adjustable 280 ° to work in urbanized areas or perform work load. For the work of loading, it is possible to have a hydraulic valve at the end of the fireplace to better direct ejection in the truck bed (optional).

The turbine slip on the pavement with these shoes wear steel (400 brinells) adjustable. For pavements with special coatings, it is possible to have a support roller in place of the wear shoe. It is also possible to have a roll of lateral support to lean against walls or rails for security (optional).

Quickly interchangeable with a bow or a convertible snow plow with its standardized framework.
Our turbines are studied side also set directly on agricultural trailer 3 points.
They are driven by the PTO of the vehicle (100 to 300hp depending on model) or hydraulically.
Icebreaker propellers before cutting.
Mechanical safety of turbines and propellers icebreaker by shear pins.

The HS 260 & 270 are provided with two shells ejection and movable hydraulically, so as to be oriented to the ejection to the right or left. Caps allow hydraulic guide rolls snow on the front. These machines are especially recommended for removing snow from roads, mountain trails and parking areas of airports, railways and large parking Ski.

The HS 240 is a snow blowers with a central chimney-piece, adjustable to 280 ° hydraulically. It can be equipped with a hydraulic valve end chimney (optional). This double turbine is ideal for urban snow removal municipalities or mountain resorts.

Intechangeable quickly with a bow or a snow plow.
Our turbines are studied side also set directly on agricultural trailer 3 points.

They are entraînnées by the PTO of the vehicle. Power handling according to our models up to 300hp
(more on request).
Hydraulic double effect.
Quick hitch frame depending on the type of carrier.
Wear blades bolted brinells 400.
Icebreaker propellers before cutting.
Adjustable wear clogs.
Mechanical safety of turbines and propellers icebreaker by shear pins.

TURBO BLOWERS type W specially adapted for micro tractors and Agricultural tractors. They are designed to achieve outstanding performance with reliability . They are manufactured with high quality materials to withstand the toughest demands . They come to the end of the hardest snow and glacées.Les two spirals attack snow and guide towards the ejection turbine centrifugal snow and forcefully projected 25 mètres.Ils offer clearing width from 1.000 mm to 2.600 mm . They are available in various drum diameters and turbine discharge . Through their end bearings , you can do the work of widening the shoulder without straining trumpets bridge milling. The 280 ° rotating fireplace with loading valve (hydraulic optional) allows you to load a truck to remove the snow in urban areas. Coaching is done by the front pto tracteur.Il mounts to lift three points of the tractor ( W 550 series 1 and series 2 for other models) in case of overload or meeting with a foreign body on the cutter body , a torque limiter with automatic re- Inrush protect it.
They are operating in an urban community, ski resort, in the openings of Alpine passes and airports .

The TSI TURBO BLOWERS were designed to achieve outstanding performance with reliability.
They are manufactured with high quality materials to withstand the toughest.
They come to the end of the hardest snow and frozen.
They offer a clearing width ranging from 2.500 mm to 2.800 mm. They are available in several diameters of drum and turbine discharge.
Thanks to their end bearings, you can perform widening of shoulders without straining the trumpets bridge milling.
The two spiraling attack the snow and to guide the turbine centrifugal ejection snow and plans to forcefully eject live 45 meters.
Combination, triple output fireplace, offers a choice between right and left ejection direct or through a chimney rotary valve with 280 ° hydraulic loading.
The training is carried out by front PTO the carrier vehicle.
In case of overload or meeting with a foreign body on the cutter body, safety pins protect it.
They are operating in a ski resort, in the openings of Alpine passes and airports.

The spreaders are fitted in bins, on rocks or directly on the frame with a fixed or removable. Several types of fasteners are possible.
It is also possible to ask the spreaders on trailers or farm.

They settle easily adjustable crutches or integrated into the spreader.

The system is brought salt screw with variable pitch and can be completed by a shaft mixer to avoid any phenomenon of vault of the extraction screw salt.
This system can also effectively spread salt, sand or gravel.
Spreading width from 3 m to 12 m, with large diameter disc made ​​of stainless steel.

With their addition device boiled salt solution best suited to treat icy roads, in temperatures below -6 °. The slurry of salt is also recommended for preventive salting because it "sticks" to the road and the melting process is instantaneous. This solution saves money you salt throughout the winter and reduces the impact on the environment.

Our electronic control units CR 10.55 or CR 10.50, provide precision dosing to work economically and environmentally. Both models are ideal for working on a large number of roads, highways, parking lots. Our boxes are easily placed in the cab of the vehicle and are easy to use.

The spreaders SICOVIS can be driven by different systems. The easiest way by the vehicle hydraulic system or engine also Auxiliary.

Components used, high quality, guarantee the quality and reputation of our products.
The capabilities of our spreaders fit your vehicle carriers.

They are designed to fight effectively against the ice in the harshest weather conditions. The hopper is made ​​of stainless steel 304 L or steel according to your choice.

Always looking for new innovations SICOMETAL developed this spreader to meet the increasing use of tractors for plowing.

We've taken the proven technology of the system with a worm spreading 3 to 12 meters per disc with stainless steel protection tube it.

Components used, high quality, guarantee the quality and reputation of our spreaders.

Our electronic control units or CR 10.55 106.03 ELK, provide precision dosing to work economically and environmentally.

The three models are ideal for working on a large number of roads, highways, parking lots.

Our boxes are easily placed in the cab of the vehicle and are easy to use. All the electronics and electric sheath arriving in a sealed enclosure IP 55.

The drive of the spreader is made by two systems:
- Driven by the tractor hydraulics.
- Driven by the PTO of the tractor by means of a universal joint, resulting in a multiplier coupled to a hydraulic pump, oil tank with a filter and filter back pressure.

SICOMETAL welcomes your vehicles in its workshops for modified and adapted to mount a hitch plate standard front and side if necessary, in accordance with the manufacturer's recommendations for winter service.
Our plates are fully bolted to the vehicle chassis with the fittings in required.
Once the vehicle has changed, we provide installation file to receive mine before its release.
Our plates fit on vehicles from 3.5 to 42 T.

SICOMETAL la bienvenida a sus vehículos en sus talleres para la instalación de la norma hidráulico multifunción para la nieve. La instalación se realiza de acuerdo con las especificaciones del cliente para operar las herramientas o nieve o de otro ser montados.
El equipo hidráulico consta de:
- Un depósito hidráulico con una capacidad relacionada con la velocidad de flujo de la bomba o bombas montadas en el vehículo. Tanque equipado con filtro de succión, nivel de filtro de retorno eléctrico magnético tapón de drenaje de la válvula de aislamiento, tapón de llenado, ventilación, suministro de acolchado.
- Cuerpo de la bomba simple o doble 19 a 48 para tener una bomba de caudal variable cm3.Possibilté. La bomba está montada en la conexión posterior de la caja o unida al motor en tándem con engranajes, poleas, correas de transmisión y de tensado.
- Válvula con control eléctrico con el número de funciones necesarias para el buen funcionamiento de los equipos instalados en el vehículo. Float función de limitador y apoyo.
- Caja de control eléctrico colocado en la cabina ergonómica medios de comunicación respeten la conducta o el joystick.

SICOMETAL offers its workshops, the signaling arrangement in accordance with the rules of the road.
- Installation of double bar on the cab.
- Tri flash to lift mechanical or electrical.
- Orange beacon
- Flashing blue lights
- Reflective Class 2.

We can provide a wide range of snow chains, high quality.
Contact us for an offer.
Depending on how many pairs you want, your tire sizes and the use you will make of your channels, we will advise you on the best model to choose and we will send you an offer quickly.

Robustness due to their high quality design and convenient to use with many technical innovations!

Our sweepers are all equipped with a system that allows you to replace the brush in less than 5 minutes without tools.

The bearings are sealed in bearings, sealed for durability.

On hydraulic models, a lateral offset of + or - 450mm hydraulic is available (optional) to avoid obstacles on the edges of floor without having to touch the steering.

Ability to mount a tape scrap hydraulic tipping (optional).

They are suitable for cleaning of roads in summer as in winter snow through the use of suitable brushes.

They adapt to all types of market coupling, SETRA, DIN, 3 points agriculture.

The drive of the brush is achieved either by the power take-off (PTO) of the vehicle or the vehicle hydraulic system.

Ability to mount a ramp humidification with freestanding tub and electric pump to avoid flying dust and clog the air filter of vehicle (optional).

Brine facilitates the de-icing of roads in winter and gives better results in terms of consumption savings of up to 50% salt after your salting process and contributes to the protection of the environment.
Automatic manufacturing plants SICOMETAL have developed summers to respond effectively and according to your needs.
Facilities require little shell. They allow you to treat roads effectively in temperatures up to -12 °.
Our models provide a production of 3 to 6 m 3 with a built-in storage or 10000l 5000l to separate storage exceeding 50000l.
Our plants are manufactured in 316 L stainless steel to resist corrosion.
Manufacturing is fully managed by a PLC (manufacturing brewing timed restart after filling with dry salt or loading a spreader).
It provides you with brine reduced at a rate between 21 and 23%.
All components hydro are located in an enclosure class IP 57.
We are able to provide you transport tank for brine storage tanks vertical. Do not hesitate to contact us